Suits a floating shelf in size to 500mm in length , maximum 350mm in depth and minimium of approximately 40mm thickness.
The bracket is screwed to the wall using appropriate fixings and the shelf fitted onto the support tubes.
We recommend using a drill press to ensure holes bored into the rear of your custom shelf are dead straight.
The shelf can be secured through two pre drilled holes in the support tubes or masking tape can be wrapped around the tubes to give a nice tight fit into the bored holes in the shelf. Note the support tubes have a slight upward angle to help compensate for any shelf droop when shelf is loaded up, so the bracket must be fitted with the stamped arrow indicator facing upwards.
The bracket base piece is 30cm long x 4cm deep and is 2.5mm thick.
Support tubes are 18mm in diameter and 19.5cm long from front face of base.
Multiple holes provided for fixing to the wall, however other holes can be drilled if required to coincide with studs in a hollow wall installation. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of 5 are required per bracket.
Floating Shelf Bracket
Finish Black
Material – steel
Suits floating shelf to 500x300x50mm
5PB2
Related products
Floating Shelving Brackets
Finish Black Material - steel For shelves to 500mm long 5PB4520
Floating Shelving Brackets
Material - Steel Finish - Silver Weight capacity up to 25kg per pair. Tubes - 145mm long x 15mm diameter. Base size 80mm x 25mm x 2.5mm thick 5PB8025
Floating Shelving Brackets
Finish Black Material - steel Suits floating shelf to 90cm long 5PB6080NEW
Floating Shelving Brackets
Material – Electrogalvanised Solid steel rod.
Support rod – In shelf portion 160 mm L x 12mm dia.
In wall threaded portion 70mm long.
Suits shelves any length up to 250mm deep.
5FB16012SIL
Floating Shelving Brackets
Finish Black Material - steel Suits shelf to 300mm long 5PB2520 New. Bracket for thinner shelves.
All Floating Shelves
Material - steel Heavy duty hollow wall anchor For 10-13 mm thickness gyprock Weight capacity to 15KG HW3
Floating Shelving Brackets
Finish Black Material – steel. Base is 720mmx40mm Suits shelves to 1500L x 300D x 50mm thick For solid or cavity walls 5PB5
Floating Shelving Brackets
Material -Solid steel Support rod – 172 mm L x 12mm dia. In wall portion 72mm Suits shelves any length to 200mm deep. For wooden stud or brick wall fitting. 90979ZP (PAIR)
90979 brackets
with 19mm oak sand floating shelf