Floating Shelf Bracket

Suits a floating shelf in size 250-300mm in length, 200mm depth, and a minimum of 25mm thickness. Multiple brackets can be used for fitting longer shelves.
The bracket is screwed to the wall and custom shelf fitted onto the 2 support tubes.
A custom shelf can be secured to the bracket utilising the two holes in the support tubes. The support tubes have a slight upward angle to help compensate for any shelf droop when shelf is loaded up.
Bracket base piece is 185mm long x 23mm deep and is 2mm thick steel.
The brackets support tubes are 12.5mm in diameter and 133mm long measured from front face of base.
6 holes are provided for fixing to the wall, however other holes can be drilled if required to coincide with studs in a hollow cavity type wall. Note the weight capacity of this bracket depends entirely on wall fixings and the size of the custom shelf fitted using this floating shelf bracket. More than one bracket can be used for fitting longer shelves. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of 4 are required per bracket.