Floatfix MEGA floating shelf brackets steel (pair of) 200X16mm

Pair of very popular unique adjustable individual solid steel floating shelf brackets for wooden stud fixing with up to 25KG weight capacity per pair, when fixed correctly into solid wood wall studs or good condition brick or block type wall, using appropriate masonry wall plugs to suit with the brackets spaced at a maximum of 600mm or stud centres, fitting a shelf of up to 350mm in depth. Deeper shelves can be fitted using these brackets but weight capacity will be lower as shelf depth is increased.
The solid steel “in shelf” part support rod is in total 200 mm long x 16mm diameter, plus 100mm of the in wall portion of the bracket rod length threaded. The threaded portion is set off centre to the rod centre. This allows fine adjustment by rotating the fitted bracket with your fitted spanner to achieve exact spacing and a level floating shelf. (machined flats are provided on the rod to allow spanner location and adjustment). Suitable for your custom manufactured floating shelves of minimum thickness 18mm (1.8cm) and above, and with a depth of up to 350mm.(Brackets can be used to fit deeper shelves but weight capacity decreases as shelf depth increases) Use a minimum of 2 brackets per shelf, but we recommend at least one bracket is used every 500mm spacing in a solid/brick type wall, or into every stud in a cavity type wall. Ideally ensure brackets are fitted into the centre of the wooden stud. Not suitable to fit to steel studs or directly into drywall (gyprock) type wall sheet.