This new size bracket suits a custom floating shelf of approximately 700-1200mm in length, up to a maximum of up to 250 mm depth, and a minimum of 25mm (2.5cm) in thickness (so the bracket base piece can be rebated into the rear of your custom shelf). Multiple brackets should be used to fit longer shelves to give better weight capacity. The bracket is fitted to the wall using fixings to suit the wall type and weight capacity required, and your custom shelf fitted on to the support tubes once the rear of the shelf has been rebated to hide the brackets base piece size (630 x 20mm) and your shelf board is drilled/bored to suit the diameter and length of the bracket support tubes. (We highly recommend using a drill press or horizontal borer to bore holes in the rear of the shelf). Shelves can be secured to the bracket utilising the two holes in the support tubes alternatively using small grub screws or simply by wrapping masking tape around the tubes to give a tight fit into the bored holes. Please note the tube support rods have a designed slight upward angle to help compensate for any shelf droop when a shelf is loaded up.
The bracket base piece is 630mm long x 20mm deep and is 2.5mm thickness steel. The brackets shelf tube supports are 12.5mm in diameter and 133mm long measured from the front face of the base. 7 x 5mm diameter holes are provided for fixing to the wall surface, however extra holes can be drilled into the bracket base if required to coincide with wooden or steel studs in a hollow cavity type wall.(highly recommended)
Please note, as with all floating shelf brackets the weight capacity of this bracket depends entirely on wall type, wall fixings used, and the actual weight and dimensions of your custom shelf (particularly the depth out from the wall) being fitted using this floating shelf bracket. More than one bracket can be used for fitting longer shelves. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of 5 are required per bracket. If fitting only into gyprock/drywall sheet, the shelf/bracket weight capacity will be dependent on the strength of the wall sheet. A correctly installed bracket will have no visible movement between the brackets base plate and the wall surface when load is applied to the bracket rods.
Floating Shelf bracket 630×20 base size
Finish Black powdercoated.
Material – steel.
Suits shelves up to 1200 long x 220 deep.
From 25mm-40mm in thickness.
5PB10020
Related products
Floating Shelving Brackets
Material - Steel Finish - Anodised Weight capacity to 30KG Size - tubes 155mm long x 18mm diameter 5PB10
Floating Shelving Brackets
Finish Black Material – steel. Base is 720mmx40mm Suits shelves to 1500L x 300D x 50mm thick For solid or cavity walls 5PB5
Floating Shelving Brackets
Floating shelf bracket Finish Black Material - steel Suits floating shelf to 30cm long 5PB25
Floating Shelving Brackets
Material – Steel Finish – Black Weight capacity up to 30kg per pair. Tubes – 200mm long x 16mm diameter. Base size 45mm x 30mm x 2.5mm thick 5PB4530
Floating Shelving Brackets
Floatfix MEGA floating shelf brackets steel (pair of) 200X16mm
Material – Electrogalvanised Solid steel rod.
Support rod – In shelf portion 200 mm L x 16mm dia.
In wall threaded portion 100mm long.
Suits shelves any length up to 250mm deep.
5FB20016SIL
Floating Shelving Brackets
Material - Steel Finish - Anodised Weight capacity to 30KG Size - tubes 155mm long x 18mm diameter 5PB1
Floating Shelving Brackets
Material -Solid steel Support rod – 172 mm L x 12mm dia. In wall portion 72mm Suits shelves any length to 200mm deep. For wooden stud or brick wall fitting. 90979ZP (PAIR)
90979 brackets
with 19mm oak sand floating shelf
Floating Shelving Brackets
Material - Steel Finish - Silver Weight capacity up to 25kg per pair. Tubes - 145mm long x 15mm diameter. Base size 80mm x 25mm x 2.5mm thick 5PB8025