Floating Shelf Bracket

Suits a floating shelf in size to 500mm in length , maximum 350mm in depth and minimium of approximately 40mm thickness.
The bracket is screwed to the wall using appropriate fixings and the shelf fitted onto the support tubes.
We recommend using a drill press to ensure holes bored into the rear of your custom shelf are dead straight.
The shelf can be secured through two pre drilled holes in the support tubes or masking tape can be wrapped around the tubes to give a nice tight fit into the bored holes in the shelf. Note the support tubes have a slight upward angle to help compensate for any shelf droop when shelf is loaded up, so the bracket must be fitted with the stamped arrow indicator facing upwards.
The bracket base piece is 30cm long x 4cm deep and is 2.5mm thick.
Support tubes are 18mm in diameter and 19.5cm long from front face of base.
Multiple holes provided for fixing to the wall, however other holes can be drilled if required to coincide with studs in a hollow wall installation. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of 5 are required per bracket.