Floating Shelf Bracket 80x25mm base size

New sized single floating shelf bracket with a weight capacity of up to 25kg per pair (actual weight of the shelf must be considered) when fitted correctly into a solid good condition brick/cement wall. (using extra/multiple brackets will increase the weight capacity of floating shelves). The bracket base size is 80mm wide x 25 mm deep x 2.5 mm thick steel with 4 slotted fixing holes (to allow small adjustment when fitted). The fixing hole spacings allow the bracket to be fitted to the wooden studs in a cavity wall. The tube support is 145 mm long x 15 mm diameter.( the rod can be cut down to suit shallower depth shelves). Suitable for custom floating shelves of any length, and of thickness 30 mm and above with a maximum depth of 250 mm.(please note the weight capacity of the brackets decreases as shelf depth is increased). For long shelves it is highly recommended to use one bracket per stud in a hollow wall installation, or one bracket every 500 mm spacing in a solid/brick type wall. (the more brackets used the higher the weight capacity.) Hollow wall anchors can be used if fitting to gyprock cavity type walls available here. Minimum of 2 are required per bracket, note the brackets weight capacity will then only be as strong as the strength of the wall sheeting