This bracket can suit a floating shelf in dimensions of up to 1200mm in length 300mm depth and minimum of approx. 45mm thickness.Weight capacity can be up to 25KG of evenly distributed load if fitted correctly to solid brick type walls.(depending on wall type, fixings used, shelf size and importantly depth). Weight capacity decreases when used to support deeper or longer shelves, or fitted only to gyprock sheeting in cavity type walls. (weight capacity of the bracket will then be limited to the strength of the gyprock sheet)
Bracket is fitted to the wall using correct screws and fittings, and shelf fitted on to the support tubes.
The shelf can be secured through two pre drilled holes in the support tubes or by a silicone type adhesive. Note the support tubes have a slight upward angle to help compensate for any shelf droop when shelf is loaded up, so please ensure the bracket is fitted with the stamped arrow indicator facing upwards.
Bracket base piece is 63cm long x 4cm deep and is 2.5mm thick steel.
Tubes are are 19mm diameter and 19.5cm long measured from front face of the bracket base.
Multiple holes provided for fixing to the wall, however extra holes can be drilled if required to coincide with studs if fixing to a hollow wall. Maximum weight capacity is only achieved when fixing to solid walls, or into studs in a hollow gyprock type wall. Please note the weight rating of the bracket decreases as shelf depth or length is increased. Hollow wall anchors can be used if fitting to cavity type walls available here. Minimum of 5 are required per bracket.
Floating Shelf Bracket 630x40x2.5mm
Finish Black
Material – steel
Weight capacity up to 25KG
Suits floating shelf to 1200x300x50mm
Or max. 1000mm x 350mm deep
5PB4
Related products
Floating Shelving Brackets
Finish Black Material - steel Suits shelf to 300mm long 5PB2520 New. Bracket for thinner shelves.
All Floating Shelves
Material - steel Heavy duty hollow wall anchor For 10-13 mm thickness gyprock Weight capacity to 15KG HW3
Floating Shelving Brackets
Floatfix MEGA floating shelf brackets steel (pair of) 200X16mm
Material – Electrogalvanised Solid steel rod.
Support rod – In shelf portion 200 mm L x 16mm dia.
In wall threaded portion 100mm long.
Suits shelves any length up to 250mm deep.
5FB20016SIL
Floating Shelving Brackets
Finish Black powdercoated.
Material – steel.
Suits shelves up to 1200 long x 220 deep.
From 25mm-40mm in thickness.
5PB10020
Floating Shelving Brackets
Floating shelf bracket Finish Black Material - steel Suits floating shelf to 30cm long 5PB25
Floating Shelving Brackets
Finish Black Material - steel For shelves to 500mm long 5PB4520
Floating Shelving Brackets
Material -Solid steel Support rod – 172 mm L x 12mm dia. In wall portion 72mm Suits shelves any length to 200mm deep. For wooden stud or brick wall fitting. 90979ZP (PAIR)
Floating Shelving Brackets
Material - Steel Finish - Anodised Weight capacity to 30KG Size - tubes 155mm long x 18mm diameter 5PB1